How to Connect WiFi Extender to TalkTalk Router via Wire?

Did you purchase a Netgear wireless range extender to enhance your home network but are not sure how this will happen? Well, it is quite easy. You just ought to connect the extender to the router in your house. In this blog post, we will take the example of the TalkTalk router. In case you are keen on learning how to connect Netgear WiFi extender to TalkTalk router, then continue reading this guide.

Which Source of Connection Should You Use?

There are two methods through which you can connect the wireless range extender to the host router. First is the WPS method and second is the manual method.

Although the WPS method is easier to execute, still many users prefer using the second method. The reason being, it is more reliable in comparison. When one links the devices wirelessly, there is always a chance for the connection to drop. However, same will not be the case if you use an Ethernet cable for the establishment of the same.

Considering this, you should also opt for the wired source of connection and continue reading to learn how the connection between the networking devices can be made.

How to Connect WiFi Extender to TalkTalk Router?

1. Clean the Ethernet Ports

Commence the process by cleaning the ports located on the Netgear wireless range extender and the host router. You can do this with the assistance of a cotton swab. Make sure that you do not wet the swab before putting it to use. It will cause issues for you in the future otherwise, mainly connectivity issues.

2. Connect the Ethernet Cable

Once you have cleaned the Ethernet ports on both the extender and the host router, plug one end of the Ethernet to the first device and plug the other end to the second device. Make sure that you plug the cable in port one of the router. The reason being, the ISP usually provides to the first port. The rest get enabled on request.

3. Ensure a Tight Connection

Make sure that the Ethernet connection is finger-tight. This can be assured if you hear a click sound after plugging in the cable into the ports. We are suggesting you this because leaving the connection loose will prevent you from completing the Netgear WiFi extender setup process using the web address.

What Precautions Should You Take?

While learning how to connect WiFi extender to TalkTalk router, it is important that you keep the required precautions in mind to avoid getting stuck with issues.

1. Mind the Ethernet Length

The major precaution which you should take in the scenario which you are in as of now is that the distance between the Netgear wireless range extender and the TalkTalk router should not be too much. This is because, if the length of the cable is short, and the distance between the devices is too much, then the cable will keep getting unplugged from the ports located on the networking devices.

2. Proper Space for Removal

Considering cables are constantly revolving and their structures change every now and then, there will be a need to replace the old ones with the new ones in the future. Given this, ensure that there is an ideal amount of space between the networking devices in order to remove the older cables when required. When space is limited, it could allow a hazardous issue to occur and cause connectivity issues.

3. Perform Thorough Testing

While using an Ethernet cable to connect the extender and the router is always a good idea, testing the cable and ensuring that it is working properly or not is also important. This involves checking the length of the cable. Also, make sure that the cable in use is following the speed transmission guidelines. Trust us; using a tested cable will help you to achieve Netgear extender setup via the IP success.

4. Put a Waterproof Cable to Use

In case you are planning to locate the Netgear wireless range extender in the lawn of your house, then using a waterproof cable is recommended. Waterproof cables are more likely to withstand rainy and stormy weather. Thus, when you purchase an Ethernet cable, make sure that it is waterproof before you attempt to create a connection Netgear wireless range extender and the TalkTalk wireless router.

5. Place the Cable with Straps

Last, but not least, make sure that you use cable straps to anchor the Ethernet cable. Doing so will ensure that the cable stays from water sources and direct sunlight. Also, if you have a pet at home, this placement of the cable will make it hard for it to chew it and cause damages. If you keep all these precautions in mind, nothing will be stop you from learning how to connect WiFi extender to TalkTalk router with ease.

Disclaimer: is completely an autonomous service provider for range extenders along with similar devices. All the brand names, products, trademarks and services used on our website are for referential purpose only and we hereby declare that we do not own any product that we provide. Our services are provided only on demand by users.