EX6400V2 Connected, Router Link Light no Longer Ring[FIXES]

Netgear products like EX6400V2 access point can connect to any brand WiFi router pretty easily and configured by 192.168.1.250. If you are facing the problem like EX6400V2 access point connected to the router. But router link light not ringing, the have a look at the reasons and solutions;

Reasons:

The Netgear extender and routers have a link light which rings when a networking device connects with it. There can be many reasons why it not rings sometimes;

• The EX6400V2 access point is not connected to the router properly.
• The extender is plugged in out of the range of the home router.
• EX6400V2 is connected but not getting any internet signals from the router device.

Now, let’s get to know about how to solve the EX6400v2 access point with hard wire connected, router link light no longer has lights issued.

Solutions:

There are only the major solutions covered to solve the issues mentioned above, if these tips are not enough to solve the issue, then contact us.

Check Extender to Router Link Properly

The router to extender link must tight even if you connected them with or without cable. So make sure that the devices are properly connected and are working fine on different locations of your home.

Make Sure Cables Are in Fine Condition

The user hard wired the extender with the router for the connection. Just make sure that the cables is in fine condition, if not then replace them right away.

Reboot Home Router for Once

There are two ways to the reboot the settings of the home router device;

• Plug out the power cord of the device from the wall socket and plug it in again.
• Press the power button for twice, it will also restart the home router device

You can try rebooting the EX6400V2 access point once by plugging it out from the wall socket.

Reset If Issue Not Fixing

The reset process deletes all the data from the cable modem and comes to default settings;

• Find the Reset button on the device.
• Press and hold button for 7 seconds.
• After releasing it the reset process starts and done after some minutes.

Then you have to reconfigure it again from the mywifiext.net login from your computer.

• To configure the device, you have to connect the computer to the extender network via LAN cable.
• Enter to the web browser, type the URL mywifiext.net or IP address 192.168.1.250 and search by pressing Enter button on the keyboard.
• You will reach to the interface window login page where you have to enter the username and password.
• The default Admin username and password are given on the device label or in the user manual of the extender.

• Just enter the details and click on the Login button, you will get to the interface where you can easily adjust all settings.

Conclusion

Here, you have read reasons why EX6400V2 connected, but router link light no longer rings. you also got the solutions to fix it.