EX6150v2 Connects to Router But Cannot See on WiFi [FIXED]

There are a lot of the extenders that Netgear provide to the users. The issue is EX6150v2-Connects to my router but cannot see on WiFi choice. If you are facing this, you can’t event access the mywifiext interface, so you must solve it right away. Here, you will get to know about why you are facing this problem and how to solve it with the help of simple solutions.

Reasons Why You Cannot See EX6150v2?

There can be some mini issues that can be the reasons of the problem like EX6150v2-Connects to my router but cannot see on WiFi choice. Have a look at the reasons list below here;

• The firmware version of the device can go corrupted and the some bugs are being a reasons of the issues mentioned about.
• The router is connected to the mode via cable but not connected to the extender via WPS method.
• If you are using the phone or laptop out of the extender EX6150v2 range, then you will face the same trouble.
• Wrongly selected frequency channel of the EX6150v2 extender also can be a reason of the issues mentioned.

Now, have a close look at the solutions that you can fix the device issue EX6150v2-Connects to my router but cannot see on WiFi choice.

Solutions to Fix EX6150v2Link Issue

There are only the major solutions and tips are added in this section list that is used by most of the users facing the same issue.

Update Firmware

The firmware version update can boost the speed of the extender and manage the settings easily from the interface or app. To start the update, you must download the new firmware version file (Latest) from the Netgear support.

Then after downloading the file, you have to access the interface through the IP address 192.168.1.250. Go in to the Settings > Administration > Firmware > Paste the file > click on the UPDATE button.

Adjust Channel Accordingly

There are total two frequency channels in theEX6150v2 range extender, which you can change from the interface. You just have to connect the computer and access the interface via mywifiext.net login page. Here, go in to the Settings >Administration> Wireless Network > click on the channels/bands > select the channel (5 GHz or 2.4 GHz). Then SAVE the changes.

Reboot EX6150v2

The network should be rebooted after the connection, configuration and firmware update. There are two methods to restart the device;

Plug out the device power adapter from the wall socket and plug it again. The other way is to press the power button of the devices for twice.

Perform Hard Reset

To reset the device, you have to just press and hold the RESET button (pinhole) for 7 seconds per node. Then, wait for some time, and reconfigure the device by using the GUI Interface.

The Conclusion

Here, you have seen and learned about how to fix the EX6150v2-Connects to my router but cannot see on WiFi choice issue.