In today’s scenario, our daily lives revolve around technology and when we get some sort of interruption its quiet frustrating. Same is when printer stops printing or get disconnected with WiFi in the middle of the task. Let’s understand the reason behind this failure and how we can fix the problem to save time and efforts in future tasks.
Reason: Why Printer not connected with Wi-Fi
Some probable reasons are illustrated below:
- There might be some fault in the power supply from the electrical socket to the printer.
- Some internal technical error can act as hindrance in establishing the connection.
- Your printer and your PC may not be connected with same WiFi network.
- Multiple printing commands can also disrupt the connectivity.
- If the connected Ethernet cable is damaged or wrongly connected.
- Too far and too close placement of printer from the extender could be a possible reason of connectivity issue.
- Out dated firmware version can enhance technical glitches; download Netgear Nighthawk App to get time to receive important security and firmware updates.
Now, we have got some clarity about the possible reasons; let’s work on the solutions to resolve the issues.
Solutions: Printer not connecting to WiFi
First of all, make sure the power socket is in good condition and providing adequate amount of power supply. Printer should always be connected to the same WiFi network as computer.
Distance among the Printer and the Netgear Extender should be appropriate. Moreover, make sure to place them both away from any sort of electromagnetic radiation emitting devices.
It is always advisable to use the latest version of firmware update. Out dated firmware may hamper network connectivity and printer won’t be able to establish connection with the Netgear extender. You can download the latest printer firmware driver from mywifiext.net and install it.
If your printer is connected with the extender via Ethernet cable then make sure that both ends of the cable are inserted in the correct ports. Keep cable refrain from any sort of wear and tear.
Reboot
Rebooting plays a vital role, plug off the printer from the power outlets and after a pause of couple of minutes re-plug it. This will help to rectify the temporary glitches in the network. Afterwards, locate and connect with the extender network named as Netgear_Ext.
Reset
When nothing works Reset comes to rescue. Resetting the system helps in erasing the customised setting and enables you to set it up all over again. You can perform so by following the steps below on printer’s touch screen:
Click on Settings > Go to Restore default settings > Tap on Reset button
Once you reset the entire customised settings wipe out, you need to login again either via IP address 192.168.1.250 or www.mywifiext.net.Now can reset the system settings as desired.
Closure
This is all about the possible reasons for Printer not connecting with Netgear WiFi extender and the respective solutions to fix the issues.