Is your Netgear router not getting full speed? If you are nodding your head yes to the question, know that your days of worrying are over because we are here to assist you. In this post, we have summed up some of the topmost troubleshooting hacks that will help you resolve the issue at hand. Thus, scroll down and read on.
Fixed: Netgear Router Not Getting Full Speed
1) Reboot Your Netgear Router
One of the biggest reasons why you are struggling with the Netgear router not getting full speed issue is because of technical glitches. To get rid of these glitches, you need to reboot your Netgear wireless router. Here is how you can do that:
- Disconnect your client devices connected to the network of the router.
- Turn off your Netgear router and unplug it from its power source.
- Wait for a couple of seconds.
- Then, plug your Netgear router back into its power source and turn it on.
- Reconnect your client devices connected to the network of your router.
Note: Make sure that there is no Netgear router red power light visible after you turn on your wireless device.
2) Verify the Ethernet Connection
Another reason why you are stuck with the Netgear router not getting full speed issue is because you have used a damaged Ethernet cable to connect your router to the existing modem.
To troubleshoot the issue, it is recommended that you get the Ethernet cable you are currently using replaced with a new one.
3) Bring Your Devices Closer
Apart from ensuring a strong connection between your Netgear wireless router and the existing modem, make sure that the distance between them is not too much. Or else, it will get difficult for them to communicate.
Therefore, make sure that you place both your wireless devices in close proximity.
4) Perform Firmware Update
You can also try to fix the Netgear router not getting full speed issue by updating the firmware of your device to the latest version.
To perform Netgear router firmware update:
- Switch on your computer.
- Launch an internet browser.
- In the address field of your browser, type routerlogin.net.
- Press the Enter key.
- Did you redirect to the login page of your Netgear router? Good. Now, fill in the default username and password and click the Log In button.
- Once you have logged in, head over to the Settings menu.
- Select Maintenance > Firmware Update.
- Follow the on-screen instructions.
In case you come across any issues while performing Netgear router firmware update, feel free to get in touch with our technical experts.
5) Avoid WiFi Interference
Make sure that your Netgear wireless router as well as the existing modem is not kept near any of the following things:
- Cordless phones
- Washing machines
- Baby monitors
- Bluetooth speakers
- Microwave ovens
- Fish tanks
- Concrete walls
- Aluminium studs
Also, avoid placing your devices near utensils containing a large amount of water.
6) Reset and Reconfigure Router
Did none of the aforementioned troubleshooting hacks help you resolve the Netgear router not getting full speed issue? Well, it is probably because of an improper setup. Looks like you need to reconfigure your device.
But, before you do that, consider performing resetting your Netgear router. Once done, refer to the guidelines given in the user manual, set up your device again, and make sure that all the Netgear lights are green.
Need Our Help?
If even after following the troubleshooting hacks mentioned in this post, you are not able to fix the Netgear router not getting full speed issue, contact our technical experts. They are always on the ball to help out users like you.