If you are facing issues in using your WiFi extender as an access point, this blog teach you with the right instructions to do so. Follow every step properly. Let’s start to Set up an RS200 using an EX6250 as an access point.
Things you need to do before Setup
Here we provide some tips or requirement that you need to check for better setup.
- Check the router properly connected to modem.
- Make sure all the power and network cables are working properly.
- Reset the extender.
- If you using WPS method for connect the EX6250 extender, reset and use the Ethernet cable.
Setup Extender as an Access Point
First of all setup the extender physically. After that use the web interface to set up an RS200 Using an EX6250 as an Access Point.
Physically Setup
- Turn off the router.
- Take an Ethernet cable and make connection between router and extender.
- Plug the extender to the power socket directly.
- Give power to both router and extender.
- After that use the web interface to enable the extender’s access pint mode.
Login to Web Interface
- First of all, connect the computer device to the extender with Ethernet cable or wirelessly.
- Then go to the browser and type the 192.168.1.250 into search bar.
- Login with the default login detail for login to mywifiext.
- When you enter the web interface, and then select the option Extender Access Point option.
- Then select the name of the network and fill their password which you desire to extend.
After setup the EX6250 extender, you need to turn enable the AP mode into the router’s web interface.
Enable Router’s AP Mode
- Attach the device with the router.
- The go to the browser and type routerlogin.com in the address bar.
- Click enter, and fill the login detail which you set before or default.
- When comes to the dashboard of the interface of router.
- Here go to the Advanced option and then Advanced Setup.
- Click on the Wireless AP option and then AP mode
- Click on the Apply button.
This way you can set up an RS200 using an EX6250 as an access point at home by using the easy to use steps. By following the above steps you can also complete the Netgear EX6250 Setup process.
Conclusion
In the above blog, you learned how to perform the Set up an RS200 using an EX6250 as an access point.