Netgear extenders are undoubtedly the best networking devices in the digital realm. But, sometimes, they also fail to perform well due to various issues. The Netgear extender keeps rebooting issue is one of them. Are you also stuck in the same mess? Yes? Fret not! This post has been written to ease out the worry lines on your forehead. Walk through the troubleshooting tactics discussed below and get rid of the issue in a matter of minutes.
[Fixed] Netgear Extender Keeps Rebooting
1. Check the Wall Socket
Are you sure that your Netgear extender is receiving a fluctuation-free power supply? Cross-check it right now. For this, have a look at the wall socket used to power up your Netgear extender. Is it in a working state? If the answer is no, then you’ve found the reason dragging you to the Netgear extender keeps rebooting issue.
Therefore, consider repairing the current wall socket or plugging your wireless extender into another one. Also, ensure a steady power supply using a UPS.
2. Connect Your WiFi Devices Properly
If the damaged wall outlet isn’t the reason forcing you to face the Netgear extender keeps rebooting issue, then chances are that your extender is placed far from the host router. Isn’t it? Well, you can rectify your mistake by bringing your WiFi devices closer. But, do not place them too close. We’re sure that you don’t want to worsen your internet experience due to a clash of their WiFi signals.
For a stable communication between your WiFi devices, we recommend you use an Ethernet cable. However, it needs to be damage-free and properly connected to the ports of your WiFi devices.
3. Disconnect Surplus Devices
Have you connected a bunch of WiFi-enabled devices to the extender’s Netgear_ext SSID? We know that your Netgear extender is capable of providing you with a reliable internet connection on multiple client devices at the same time. But, it never means that you need to connect unnecessary devices to its network.
In order to fix the Netgear extender keeps rebooting issue, disconnect a few of the WiFi-enabled devices connected to its network. What happened? Is your extender still rebooting? It seems that your Netgear range extender requires a firmware update.
4. Update the Firmware
Well, walking through the above section might have alerted you about the firmware update. But, do you know what is Netgear extender firmware? FYI, firmware is nothing but a software embedded in your Netgear extender that takes the responsibility for its overall functionality.
It means if the firmware becomes outdated, you are more likely to fall victim to the Netgear extender keeps rebooting issue. So, update the firmware by accessing the www mywifiext net setup wizard. If you are unable to do so, contact our experts.
5. Reduce WiFi Interference
Today is a digital era where everyone has smart devices and appliances at home. But, these devices are capable of interrupting or degrading the WiFi signals of the Netgear range extender. The phenomenon is known as WiFi interference. Chances are that you have also placed your Netgear extender in a room filled with WiFi interference. Thus, consider relocating your WiFi device.
During the relocation process, make sure that your Netgear range extender is not being placed near devices emitting radio-wave frequencies, metallic objects, and reflexive surfaces.
6. Prevent Overheating of Netgear Extender
Similar to other networking and electronic devices, your Netgear extender will inevitably produce heat. But, if it is heating more than normal temperatures, then it becomes a matter of concern. Apart from the Netgear extender keeps rebooting issue, overheating can also invite similar problems. Thus, take the below-mentioned precautions in order to minimize the overheating phenomenon:
- Do not choose a bottlenecked location for your extender. Place it in a well-ventilated location instead.
- Avoid exposing your Netgear range extender to direct sunlight.
- Give some rest to your Netgear extender when not required.
- Do not let the dust get collected on the surface of your WiFi device.
Final Words
By walking through the aforementioned troubleshooting tips, you will be able to get rid of the Netgear extender keeps rebooting issue. If you are still running out of luck, there is a high possibility that you didn’t achieve mywifiext local set up success during the extender’s installation. So, consider resetting and reconfiguring your Netgear extender. In case, you need expert guidance in executing the reset and setup process, get in touch with our technicians.