Truth be told, there is nothing more troublesome than a slow internet connection in 2023 especially when all your tasks need to get completed online, like accessing the Netgear WiFi extender setup wizard, attending a Zoom call, etc. In case you are accessing the network of your Netgear extender wirelessly, it is obvious why you are in this mess. There are loads of things that you can do in this case. But, in this blog, we have covered the topmost one, i.e. how you can access the Netgear WiFi extender with Ethernet port.
Note: Ensure that the Netgear range extender you are using has an Ethernet port located on it as some models do not have them. Or else, this blog will be a pointless read for you.
Will Using an Ethernet Cable Be Any Good?
We are guessing that this will be the question that crossed your mind the minute we gave you the option of accessing the WiFi extender with Ethernet port. Well, the answer is definitely a big yes. When you connect an Ethernet cable to the extender, the internet connection will flow through the cable to the device. The speed of your existing WiFi will increase by ten times. This means that you will not have to pull your hair out in frustration because of your inability to access mywifiext.net or any other website. To understand more about what will happen once you make use of the cable, continue reading.
What If You Plug Ethernet Cable into Extender?
As per our research, WiFi extenders rebroadcast the same packets as your host router and it is used to access the internet in out-of-range areas in your house. As mentioned above, in order to make the connection stable, you will have to access the WiFi extender with Ethernet port. Once this is done, the extender becomes a strong access point and it can extend the signals with the same speed as that of the router. Once that happens, you will face no issues in accessing the mywifiext.local web address.
By the way, here are the effects of the cable on two aspects of the internet in detail:
1. Effect on Internet Speed
A router can deliver an internet speed of 1gbps whereas an extender can do the same up to 10gbps, as mentioned earlier. But, you cannot expect to get the same speed from the extender if your ISP has different pans with different speed limits.
You should know that different Ethernet cables have different internet speed-providing capacities. This means that you need to purchase a plan properly. Not just that, but you need to get a compatible cable as well as a router. Ensure that if you access the WiFi extender with Ethernet port, the extender should support the internet speed only as per the ISP plan. Otherwise, you will not be able to gain access to the optimal speed as desired.
2. Effect on Latency
Another effect of using an Ethernet cable is that you will have to face more latency if the Ethernet cable is longer. However, the effect is rather negligible. The reason being, it is merely one millisecond per foot. So, it is safe to say that you do not have to stress about latency when you connect the cable to the extender as its length will not be that much.
What After You Use an Ethernet Cable?
Now that you have become aware of the advantages that you will get if you use an Ethernet cable to access your extender, keep certain things in mind to ensure that this does happen. For that, here are the points that you need to read:
Point 1
Make sure that the Ethernet cable you are planning to use is not damaged from anywhere. This means that it should neither have cuts on it nor should it be worn out. Or else, even if you have used a cable, assuming a great source, your internet speed will not be as expected.
Point 2
Along with the health of the Ethernet cable, the condition of the port is important. See to it that the port located on the extender, router, and your client device is not damaged.
Point 3
Last, but not least, ensure that the connection you will be establishing is finger-tight. Leaving the connection loose will only cause issues for you. It might even make you assume that there is something wrong with the extender or if you are not able to access 192.168.1.250 in the future, then it might because of this reason as well.
Final Words
Our guide written on how to access the Netgear WiFi extender with Ethernet port comes to an end here. We hope that now you will be able to gain access to a blazing-fast internet connection even in areas where the WiFi signal tends to go weak.
In case you are interested in knowing more about this topic, then it is recommended that you get in touch with our team. They will surely provide you with all the information that you need regarding the same. If you do not trust us, contact them now and see for yourself.