Connectivity issues are not new in the digital world. With that said, Netgear launched multiple products that promise to help a user stay connected to the internet 24/7. But, still users face connectivity issue. This post is intended to help such users. For detailed explanation of the concept, we have taken the example of WAX630E root and extender association disconnect issue which in result prevents internet access on devices connected to the Netgear_EXT network.
Why Are You Facing WAX630E Root and Extender Connection Issue?
WAX630E is a cloud managed WiFi access point that supports the tri-band technology. If your extender is facing connectivity issue with the same, the following might be potential causes:
- Extender is too far from the WAX630E
- Your extender is not placed appropriately (WiFi interference)
- Outdated firmware is making your devices incompatible
- The access point is getting no internet connection
Now that you have understood the reasons causing the issue, it is time to walk through the techniques that will help you fix the problem easily.
Fixed: WAX630E Root and Extender Association Disconnect Issue
Before you attempt to follow the mentioned techniques, we recommend you restart the range extender. This will eliminate technical glitches and make it possible for the extender to connect to the access point without any difficulty. If possible, restart your access point too.
- Check that your extender is getting a stable power supply from the outlet. For that, it must be plugged into a working outlet. In case, your extender uses a power cable, be sure that it is free of damages.
- The distance between the extender and your root device i.e. WAX630 access point must be very accurate. Keeping them too far will surely invite problems. You must make sure that the distance between both devices is not more than 10ft.
WAX630E is a tri-band access point and a range extender supporting the tri-band technology will work much better with it. If you are using a dual-band extender, then only two bands will be extended.
- Log in to mywifiext.net through a device connected to the Netgear extender network and see if a new firmware version is available for the extender. If your extender is already running on the latest version, you should check for the firmware update of your access point. Ensure that you’ve not restricted internet access to the range extender from the AP settings.
- Take a look at the cables connected to your WAX620E access point. Have you used non-damaged cables there? Just in case, the cable connecting your access point and the main router is found damaged, you need to make sure that the cables are working. You also need to check power cables.
- Check the surroundings of your Netgear range extender. Is it surrounded with factors causing signal interference? For example, devices emitting electromagnetic frequencies and reflexive surfaces. If yes, you should change the location of your range extender.
With the given tips, you will be able to fix the WAX630E Root and Extender Association Disconnect Issue. However, if you fail, reset the extender and set it up once again using the 192.168.1.250 IP address.
To Sum Up
From the above discussion, we found that the WAX630E and extender connectivity issue arises when the distance is poor, firmware is outdated, or location is improper. By addressing all these limitations, you will be able to address the issue. And if you fail, the option of resetting and reconfiguring is always there.