Netgear WiFi range extenders are not new in the digital world. Given that, almost every owner knows that the extender can be managed through the default web or IP address. By default, the extender runs on the IP 192.168.1.250 and the web address mywifiext.net. However, the address changes when you want to attempt for the extender login process with the help of Mac. In that case it is recommended that you go with the address “mywifiext” followed by the “.local” extension. But, there’s one thing in common about these addresses. All you have got to do is input these addresses into the browser’s URL bar to navigate to the extender’s administrative portal. Times are also there when the login page becomes difficult to access especially when the ERR_CONNECTION_TIMED_OUT message shows up on the browser’s screen. What is the meaning of this message and how to fix it? We will discuss the same with the help of the information highlighted in the blog.
What is ERR_CONNECTION_TIMED_OUT Error?
You might have visited the World Wide Web numerous times and have accessed a number of websites there. The extender’s login address mywifiext is not an exception. The error message appears whenever the site takes too long to respond.
For your general knowledge, a web browser tries for almost 30 seconds if a website does not load. After that, it shows up various error messages and ERR_CONNECTION_TIMED_OUT is one of them. You can see this error message under the following screens on different web browsers. The table given below will help you learn it in a better way:
| Web Browser | Error Message Screen |
|---|---|
| Google Chrome | This site can’t be reached. |
| Microsoft Edge | Hmmm… can’t reach the page. |
| Mozilla Firefox | The connection has timed out. |
| Apple Safari | Safari can’t open the page. |
If we put it in simple words, then you need to understand that the error message is not limited to mywifiext.net or another extender login URL. You can face this issue while accessing any domain. Let us now move ahead a little and discuss what might have caused the error message.
Reasons: ERR_CONNECTION_TIMED_OUT Error with Mywifiext
Generally the error message shows up for other domain due to the browser compatibility issue. What we mean to say is there are chances that you are using an outdated version of a web browser in order to access a particular domain.
But, when it comes to the Netgear extender login address, there is a high possibility that you are not connected to the WiFi network of your extender. Keep in mind that the login address of a Netgear extender is only accessible if your PC/laptop is connected to the network name Netgear_ext. However, you should connect to the new network name of the Netgear extender in case the default one was ever modified by you.
You also have the option of using a wired connection between your laptop/PC and the Netgear range extender. Just be sure that you are not using a damaged cable. However, this was not the only reason behind this error. Refer to the pointers given below to know what might have caused this problem:
- Connection problem with the extender and router or router and modem
- Technical glitches can also bug you with the ERR_CONNECTION_TIMED_OUT error.
- Firewall and antivirus software are active on your computer/laptop.
Troubleshooting: ERR_CONNECTION_TIMED_OUT Error with Mywifiext
In the previous section, we discussed the prime reasons causing the error while accessing the mywifiext.local or another Netgear extender address. This section will particularly focus on the techniques that can help you address the issue. However, before you attempt to implement the following hacks, it is suggested to check the URL syntax. This is because there is a high possibility that you are attempting to access the incorrect URL.
So, correct the bad URL syntax and see if the ERR_CONNECTION_TIMED_OUT error is still not letting you reach the Netgear extender’s admin portal. If nothing happens, get down to the troubleshooting techniques this instant.
- Check the Internet Connection: Run a speed test on your computer and check if you are getting the sufficient internet connection/speed. If not, then turn toward the cable you’ve used to connect your Netgear extender and the main router. It must be free of damages. You are also advised to do the same for the cable connecting the main router and modem.
Quick Tip: Try to ping your Netgear extender through the Command Prompt and see if there is a connection problem between your PC and extender.
- Restart Your Extender: Nothing can combat technical glitches better than the rebooting process. Thus, do not wait and unplug your range extender from its respective power outlet. After waiting for a decent amount of time, you can plug it back. The hack will also come to your rescue if you are facing certain problems accessing the MyNetgear portal.
- Disable Antivirus/Firewall: The last thing you can do in order to fix the ERR_CONNECTION_TIMED_OUT error message that is working as a boulder in the extender management process is to temporary disable antivirus/firewall installed on your computer or laptop.
In Conclusion
Accessing the admin page of the Netgear extender is a necessary thing for home network management. Since you were getting the ERR_CONNECTION_TIMED_OUT error during this process, it is expected that after implementing the tactics mentioned here, you will be able to resolve it easily. However, we also suggest you to disable proxy and clear DNS cache for effective troubleshooting.