How to Reset WiFi Extender to New Router?

This post covers the entire information on how to reset WiFi extender to new router. You have a router that connects with a WiFi extender. Now you want to replace the router. How to go about this process? Reading this post is going to let you know the clear instructions on the same topic. In this post, we have taken the Netgear extender as a reference. So, we will help you carry out Netgear WiFi extender setup with a new router. Let’s begin!

How to Reconfigure WiFi Extender with New Router?

Now that you have decided to replace your old router, you should reconfigure your WiFi extender with the new router. Here’s the step-by-step guide:

Step 1: Reset Your WiFi Extender

The very first step is to reset your extender. The reason being, your WiFi extender has the previous router’s settings running on it which must be deleted first. Resetting does that job. Use these steps to perform the Netgear WiFi extender reset:

  • Remove all the cables from the extender. Only the power cable should remain attached.
  • Locate the Reset button that can be found at the back of the extender.
  • Use a sharp pointed object like an oil pin to press the Reset button. You should hold it for at least 10 seconds.
  • Release the button and wait for a couple of minutes.
  • When the extender boots up back, it is ready to be configured with the new router.

Step 2: Reconfigure WiFi Extender with New Router

You will now need the Netgear WiFi extender default login details to access the setup page. Here are the steps:

  • Your WiFi extender and the root router must be in the same room or nearby so as to connect them smoothly.
  • If the devices are powered on, power them off for now.
  • Link the LAN port on the router to the Internet port on the extender with the help of an Ethernet cable.
  • Now, power on the WiFi router first and then the WiFi extender.
  • Join the extender’s network on a computer or laptop now. Use the default SSID Netgear_Ext and the default WiFi password password.
  • You can also connect them using a LAN cable.
  • Launch an internet browser on your PC now.
  • Visit on a Windows PC and mywifiext.local on a MAC device.
  • Click on New Extender Setup.
  • If prompted, use the admin username and password to log in. The default values are admin and password respectively.
  • Accept the Terms and Conditions and click Next.
  • When prompted to select the network to be extended, select your new router’s WiFi network details.

netgear extender setup configuration

  • Assign admin username and password for your WiFi extender now. Answer security questions. These will help you recover the password in case you forget it.
  • Next, assign SSID and password for both 2.4 GHz and 5GHz networks.
  • Configure a few more settings according to the on-screen prompts and save the settings once you are done.


This is all about how to reset WiFi extender to new router. You should now relocate the extender to the new place where the router’s network is to be extended.

Disclaimer: is completely an autonomous service provider for range extenders along with similar devices. All the brand names, products, trademarks and services used on our website are for referential purpose only and we hereby declare that we do not own any product that we provide. Our services are provided only on demand by users.