NetgearEX6400V3 extender is one of the networking devices that provide AC1750 WiFi speed. You can easily set it up with the help of the mywifiext.net GUI interface. But, you can also face troubles like Netgear AC1750 EX6400V3 WiFi extender no longer working. To find out reasons why you are facing these problems and how to solve it, you can take help from here;
Reasons:
- Extender is not receiving power at all.
- Netgear AC1750 EX6400V3 is not connected to the router.
- Extender is facing interruptions.
- Router is not connected to the extender.
So, these can be reasons why your Netgear AC1750 EX6400v3extender not longer working. Now, have a look how to solve the issue right away.
Solutions: EX6400V3 Not Working
There are simple to apply troubleshooting tips and solutions that you can use to fix the mentioned, have a look;
Reboot Extender Device
Reboot the device to refresh its settings and hardware. You just have to turn it off and turn it on once. You can do it by plug out the extender and plug it in again in to the wall socket. The other way to do it is finding and pressing the power button on the device twice.
Check Power Supply
If there is no power supplied to the extender then your device will not work for sure. So, check the extender is not plugged in to a power socket which is damaged. Fix the socket or change to any other location in your home, if you find any damage.
Check Extender Connected via WPS
If your Netgear AC1750 EX6400v3 device is not connected to Home router, then you can’t use the internet. So, you must check if the WPS method is applied to connect both devices.Connect the devices again, if the devices are not connected, so that you can connect to the Netgear_ext network. Use these steps to link;
- Plug in the extender to the wall socket and turn it on.
- Press the WPS button on your router and press the same button on the extender.
- Both the devices will connect with each other.
Reset NetgearEX6400V3
The last solution to dispel the ‘Netgear AC1750 EX6400v3not longer working’ issue is resetting it. to reset the device, you have to find the RESET button on the device and press it for 10 second, then release it. After this, device will start to clean itself. All the settings will set to default after reset process.
You have to re-configure the extender by using the IP address 192.168.1.250 or URL mywifiext.net.
Update Firmware
After resetting the Netgear AC1750 EX6400v3 extender, you must also check for latest updates (Firmware). You can find it on the MyNetgear portal, where you have registered your device. Download the firmware file from there and paste it in the firmware tab in the interface. Then, click on the Install option.
Final Conclusion
Here, you have seen and learned about reasons why your Netgear AC1750 EX6400v3WiFi extender not longer working. We have also provided solutions to fix it.