Extend the network reach throughout your home using a Netgear Powerline 2000 PLP2000 adapter. What is a Powerline network and how you can extend the existing network using the Powerline extender? Are you wondering about the same? Well, running through this post will answer all your queries regarding a MyNetgear PLP2000 or in fact any other powerline adapter.
What is a Netgear Powerline 2000 Extender?
A powerline extender consists of two or more adapters or devices that use electrical powerlines (cables) to communicate with each other. A Netgear Powerline 2000 consists of two compatible adapters.
One device is connected to the router and the other one is connected to the devices on which you want to access the internet.
Why Choose Netgear Powerline Extender?
In this technological era, every home has a home network with many smart devices that need an internet connection to operate. So, WiFi is the best solution to get the devices connected to the internet. But WiFi has its own limitations. At times you may get poor signals or there is signal interference. It is a known fact that Ethernet connections are always more reliable and stable than WiFi.
But managing the cables connecting to multiple networking devices is going to be a mess. To avoid this mess, Netgear has a solution and that is Powerline adapters. These devices communicate using the already set up electrical powerlines. Thus, no mess of external cables.
How to Setup PLP 2000?
Use the instructions given below to set up Netgear Powerline 2000 in your home:
- Ensure that the existing network is working well.
- Plug one PLP2000 powerline device into a well-working power outlet.
- Choose an outlet that is closer to the host router or the DSL gateway.
- Use an Ethernet cable and connect it to the LAN port of the router.
- The router should be powered up.
- Insert the other end into the Powerline device.
- Now, plug the second device into a power outlet that is near the area where you want to have internet access.
- Use an Ethernet cable to connect this adapter to the Ethernet port of the device like a Gaming console, computer, laptop, smart TV, Blu-ray player, etc.
- Let the Pick A plug LEDs turn on.
- If you want to use an encryption key, then push the Security or the Factory Reset button on any one adapter. Hold the button for two seconds minimum.
- Within two minutes, push the same button on the second adapter as well.
- The powerline devices will recognize the network and connect to each other.
- Let the Power LEDs stop blinking.
- When the Power lights are stable this means the setup is done.
You can now begin accessing internet signals on your devices.
Quick Tip to Avoid Issues with PLP 2000
1. Connect PLP Devices Directly
Avoid using any extension cord, surge protector, UPS or power strip to connect the Powerline adapter. It is recommended to use the power outlet directly to plug in the adapter. This will help you resolve issues like PLP 2000 not connecting or slow speeds etc.
2. Use Good Ethernet Cables
Many a time users complain about getting poor signals despite using the Ethernet cable to connect to the internet via a Powerline adapter. We suggest you use good quality Ethernet cables that are not damaged. Also, ensure that the cables are well intact. No loose connections are allowed.
3. Use the Same Encryption Key
For users who say that the Netgear Powerline 2000 PLP 2000 won’t set up secure network it is recommended to set up network security. But while setting up network security, be certain that all the Powerline devices are using the same Encryption key.
Wrapping Things Up
Here comes an end to our informative post about the Netgear Powerline 2000 PLP 2000 adapter. You now know how to set it up to a powerline extender with the existing network so that you can extend it through power cables throughout your home. We have also provided you with some effective tips to avoid any issue with your PLP 2000.