A blazing-fast internet connection is important for an Amazon Echo speaker for letting you interact with it in a hassle-free manner. The reason being, it is the only way it can process your commands. Without internet, the Echo speaker will just act as a regular Bluetooth speaker. This way, you will end up losing its fancy features.
There are several users who are experiencing the ‘can’t connect Amazon Echo to Netgear WiFi extender’ issue. In case you are also experiencing the same issue even after your multiple attempts to make the speaker access the internet, then the troubleshooting hacks given below will be of some help to you. Taking this into consideration, continue reading.
Why is Amazon Echo Not Connecting to WiFi Extender?
We apologize for the interruption. Prior to reading the troubleshooting tips, you ought to allow yourself to become aware of the reasons that caused the issue in debate. For this, you need to read the information given in this section:
- You are not using the correct password to access the network.
- Echo setup is not done properly by you.
- The network name of your wireless range extender is hidden.
- You are trying to access the wrong network.
- Technical glitches can also stop from connecting Amazon Echo to the extender.
Considering you have become acquainted with the possible factors contributing to the ‘can’t connect Amazon Echo to Netgear_ext issue, taking a quick look at the troubleshooting hacks given below will be great.
How to Connect Amazon Echo to Extender Successfully?
1. Restart the WiFi Range Extender
Get down to the troubleshooting process by restarting your wireless range extender. Doing so will help you to get rid of one reason behind the reason why you are experiencing the ‘can’t connect Amazon Echo to Netgear WiFi extender’ issue, i.e. technical glitches.
Here is how you can restart your networking device with ease:
- Turn the device off by pressing the power button located on it.
- Wait for a couple of seconds.
- After that, press the power button again, this time to turn on the extender.
Now, check if you are able to connect Amazon Echo to WiFi extender. In case not, then it is recommended that you make your way to the following hack.
2. Install the Echo Speaker Again
Settings up the Amazon Echo speaker can be a daunting task, no doubt, thereby becoming another reason why you are stuck in this mess. Therefore, we would suggest you to perform Echo setup first properly.
In case, you are wondering how to get your hands on the right steps to execute the process, then refer to the ones given in the manual of the speaker. You will find every little detail regarding the device in there.
3. Enter the Correct Password
Have a look at the password that you have entered in order to access the WiFi network of the Netgear wireless range extender. In case, it is incorrect then you need to enter the correct one right away. Keep in mind that you need to use the updated password.
Do not forget to consider the possibility that you might have updated the password sometime back via the mywifiext.local web address. After following this hack, check again if you are able to get rid of the ‘can’t connect Amazon Echo to extender’ issue. In case not, then you already know what to do.
4. Unhide the Extender WiFi Name
Think about it, if the network name of your range extender is not visible, how on earth will you be able to make the Echo speaker access the network? Not possible even in parallel universe. In view of this, it is recommended that you unhide the network name of your networking device via mywifiext.net by going through the guidelines mentioned here:
- Switch on your laptop.
- Open the most used internet browser.
- In the URL bar, enter mywifiext.net or 192.168.1.250.
- Press the Enter key in order to access the login page.
- Input the admin password and username.
- Hit Log In.
- To unhide the SSID or network name, check the Broadcast Network Name [SSID].
- Select this option for 2.4GHz as well as 5GHz.
- Click the Save button.
- In some time, your changes will become effective.
For your information, in case you are unable to unhide the SSID of your networking device via 192.168.1.250, then use the Nighthawk application for the same.
5. Access the Right WiFi Network
Despite following all these troubleshooting hacks, in case you are still a victim of the ‘can’t connect Amazon Echo to Netgear WiFi extender’ issue, then it can only mean thing, i.e. you are not accessing the right network.
Chances are that you have more than one extender installed at your home. Take our advice and instead of trying to accessing the last one, access the closest one. Hopefully, now you will be able to connect the Amazon Echo speaker to the network of your range extender.
The Bottom Line
Here ends our troubleshooting guide written on how to resolve the ‘can’t connect Amazon Echo to Netgear WiFi extender’ issue. By any chance, if you are still experiencing the same issue, then getting in touch with our team will be a great thing to do.