Why I Can’t See Both Extenders on Mywifiext? Need a Fix

Nothing is more annoying than WiFi issues when all you’re trying to do is chill, stream, or get some work done. You invested in not one, but two WiFi extenders because, well, dead zones are the enemy. But now here you are, staring at Mywifiext.net wondering “Why can’t I see both extenders?”

If this sounds like you, you’re not alone. A ton of users hit this exact snag while setting up or managing multiple extenders. Let’s break it down and get you connected the right way.

What Is Mywifiext.net, Anyway?

Mywifiext.net is the local web address used to set up and manage your Netgear WiFi extenders. It’s not a regular website, so don’t expect it to work if your extender isn’t properly connected.

Once you plug in your extender and connect it to your router, this address lets you access its settings. But when you’ve got two extenders and only one shows up on Mywifiext, it’s natural to think something’s broken.

Reasons: Why Can’t You See Both Extenders?

There are several reasons why both devices might not show up on Mywifiext.net. Let’s run through the common causing factors:

1. You’re Only Connected to One Extender at a Time

This is the most common reason. Your device laptop can only connect to one network at a time. So, if you’re connected to Extender A, and trying to see Extender B’s settings, it just won’t show up.

Fix: Switch your WiFi connection. Disconnect from Extender A and connect to Extender B. Then try accessing Mywifiext.net again. Boom—now you’ll see the second extender.

2. Same SSID Assigned to both Extenders

Some folks name both extenders the same as their main WiFi (or even each other). This causes a hot mess in your network settings. Your devices can’t differentiate between Extender A, Extender B, and your router.

Fix: During setup, give each extender a unique name. Something like “Home_Ext1” and “Home_Ext2” works well. That way, when you’re switching connections to manage them, you know exactly where you’re logging into.

3. Outdated Web Browser

Believe it or not, your browser can cache data from your first extender’s session. So even when you connect to the second one, you’re still seeing the first extender’s dashboard.

Fix: You have to Clear your browser cache. Or open the Mywifiext interface in incognito/private mode. If your browser isn’t responsing then try a different browser. Sometimes Firefox behaves differently than Chrome.

4. Range Overlap and IP Confilcts

It can happen that two extenders operating too close to each other without proper setup can cause an IP address conflict. That’s when your network gets confused and devices stop communicating properly.

Fix: Access to your main WiFi router settings on your computer and check assigned IPs. Ensure both extenders are getting unique IP addresses. You can assign them differnet IP address manually, if needed. Also place your extenders far enough from each other so their signals don’t interfere with another device.

5. Needs an Firmware Update

It can be a software bug n your extender device. Check the update, If you haven’t updated the firmware on either extender. It could explain weird issues like not seeing one of them on Mywifiext.

Fix: You must Download the latest firmware from Netgear’s official site and update each extender separately. It’s a 10-minute job that might just save you hours.

More Troubleshooting Tips

Still can’t see both extenders on mywifiext, here are a few more tricks:

• Use Ethernet cable: Connect your laptop directly to each extender with an Ethernet cable during setup. This gives you direct access and avoids any wireless confusion.
• Check Network Map: Some routers have a “network map” feature in their settings that shows all connected devices. This can help you confirm both extenders are online.
• Hard Reset & Reconfigure: Factory reset both extenders. To reset the devices hold down the reset button for 10 seconds, then configure them one at a time. Start with Extender A, finish the setup, then do the same with Extender B.

Should You Even Use Two Extenders?

Here’s a bit of hard truth. Two extenders in one home network setup can sometimes create more problems than they solve—especially if they’re daisy-chained (Extender A connected to the router, and Extender B connected to Extender A).

This setup often leads to latency and signal degradation. If your space is really large or has thick walls, you might be better off with a mesh WiFi system. It’s more seamless and built to handle multiple nodes without drama.

Final Thoughts

So, if you’re stuck wondering, “Why can’t I see both extenders on Mywifiext?”—now you know the answer isn’t some obscure tech curse. It’s usually a matter of how your device is connected, how the extenders are named, or how your browser is behaving.

Just take a breath, troubleshoot one step at a time, and you’ll get things sorted out.

And hey—next time your WiFi acts up, don’t panic. Just remember: tech headaches are temporary. A good connection? That’s forever (or at least until the next firmware update).

FAQs