The popularity of Netgear WiFi extenders is so much that you can see them installed in every second house of the continent. But, some users experience issues while using their extenders. One such common issue is the Netgear extender green but no internet. In case you are experiencing the same problem, give this blog post a read.
Troubleshoot: Netgear Extender Green but No Internet
Although the internet issue with your Netgear extender must be signified via the red or orange light, still if the light is green, it can occur due to a number of reasons. Right from an outdated firmware of the extender to an incomplete Netgear WiFi extender setup, multiple factors cause this problem. Have a quick nudge on the below-given information if you are looking forward to fix it.
The first thing you should do in such a situation is to restart the range extender that does not actually require much effort. Just unplug your device from its power outlet and keep it idle for a few minutes. Plug it back and see if the internet connection makes a comeback.
- Have a look at the distance separating your Netgear extender and the main router. If it is found more than 8ft, you should reduce it to the most optimal value. This way, your devices will be able to communicate easily and the internet connection will start working.
- In case an Ethernet cable is holding a connection between your extender and router, check its physical status. Sometimes, a LAN cable is causing internet-related chaos which can further result in problems accessing the mywifiext.net login address.
Note: You should also check the surroundings of your Netgear extender to verify if any WiFi-interference creating objects or gadget are messing up with its WiFi signals. Some of the WiFi interference-causing factors are heavy electrical appliances, objects containing a large amount of water, and reflexive surfaces.
Advanced Troubleshooting: Netgear Extender Green but No Internet
If the internet connection does not show up even after following the above mentioned tips, you should refer to the hacks given below. They might help you a lot.
- Log in to your main router’s settings and verify the channel on which it is operating. If should be the non-congested one. You can try changing the wireless channel to 1, 6, or 11. You can log in to your router with the help of its default IP address.
- Check whether your Netgear extender is operating on the latest firmware version. There are times when a dated firmware bugs the user with a no internet issue. Therefore, access the 192.168.1.250 IP address and verify if your extender needs to be updated. If yes, then install the latest update as soon as possible.
If possible, try power cycling the entire home network. However, it should be done in a correct sequence.
- If all else fails, there are chances that you configured your extender improperly. It means that you have to reconfigure it via the appropriate method (WPS method, Nighthawk app, or the Manual method). Thus, do the needful as soon as possible. But, remember to reset your extender before that.
The Conclusion
The moment you complete the re-installation process after Netgear WiFi extender reset, you are most likely to get the internet connection back. So, rejuvenate your internet experience by connecting your devices to the network of your extender.